Going Green and Clean Reduces Energy Use and Costs
Looking for an edge to reduce manufacturing costs? Heat and Control offers
proven systems that reduce fuel, air pollution and water usage. Currently your
return-on-investment is very attractive for these systems. When you consider future increases
in fuel and water costs, your savings will continue to grow in years to come.
|
 |
| Heat exchanger with
Combustion Air Preheater |
|
 |
| KleenHeat pollution control
heat exchanger |
|
 |
| AirSweep water
removal system |
Booster Heater
Mounted over the stack of most any
heat exchanger, the Booster Heater
uses normally wasted exhaust gases
to preheat cooking oil. Without using
additional fuel, it will increase heat
exchanger efficiency by up to 12%.
Combustion Air Preheat System
Introducing high-temperature air into
a burner reduces the fuel needed
for combustion. Our Combustion Air
Pre-Heater utilizes normally wasted
exhaust heat to reduce fuel usage and
boost heat exchanger efficiency up to
4%. Additional modules can be added
to further increase the overall process
efficiency by preheating make-up
cooking oil, air and water.
KleenHeat pollution control
heat exchanger
As it heats cooking oil, our High-Efficiency KleenHeat heat exchanger incinerates and removes virtually all odors, oil and other particulates from fryer stack exhaust that would normally pollute the air and
area around your plant. As an added bonus, our latest graduated density oil heating tube bundle provides 10% greater thermal efficiency than existing models - far exceeding the performance of heat exchangers that do
not remove pollutants!
Stack Heat Recovery System
Recover millions of BTU's of heat from the
fryer exhaust stack. This system condenses
otherwise wasted steam to make hot water
for blanching, sanitation, or even
building heat.
Burner Mixture Management
Increase heat exchanger efficiency
up to 4% by maintaining a precise
fuel-to-air mixture ratio through
the full firing range of the burner.
Alternate Fuel Systems
Reduce energy costs by using less
costly methane or other gas from
landfills, digesters, or other sources.
AirSweep water
removal system
Removing of surface water from
just-washed potato slices and
vegetables reduces the energy
used for frying or freezing…
up to 8% for potato chip fryers.
GentleWash potato slice washing system
Reduce fresh water usage up to 80% over conventional
slice washing systems. Our 3-stage Gentle Wash
process cleans and reuses wash water. It concentrates
starch and fines for more efficient removal and
reduces sewer loading and the burden on a
starch recovery system.
Sustainable processing is a win-win scenario.
Greater production efficiency reduces the
environmental impact of processing and
cuts the cost-per-pound of finished product.
|
FREE NEWSLETTER
